Learn more about SFTP Server Export Integration.

The Data Connector for SFTP enables you to import files stored on your SFTP server to Treasure Data.

For sample workflows of importing files from your STFP server, view Treasure BoxesSFTP_V2 Server Import Integration, see SFTP_V2 Server Import Integration.

...

• Basic knowledge of Treasure Data.

• Requires that your private key is in a version format earlier than OpenSSH 7.8. If you use OpenSSH 7.8 or later, use the '-m PEM' option to generate a private key.

• Before using this connector, determine valid protocols for your environment.
  • If you intend to use SFTP, you can use this
  Data Connector
  • integration for SFTP.
  • If you intend to use FTP
  /
  • or FTPS, try
  connect
  • connecting with FTP
  Data Connector
  • Import Integration.

  • If Check your accepted IP range and port if you are using a firewall, check your accepted IP range/port. Server administrators sometimes . Sometimes, server administrators change the default port number from TCP / 22 for security reasons.

  • Requires that your private key has an OpenSSH 7.8 format.

  • Requires that the OpenSSH format private key was generated using the '-m PEM' option.

  • “PuTTY” and other formats are not supported

    .The default format of the private key after OpenSSH

    .

• After installation and configuration, review the job log. Warning Job logs for warnings and errors that can provide information about the success of your import. For example, you can identify the source file names associated with import errors.

...

• see Data Import Error Troubleshooting.

Limitations

• Support only the STORED and DEFLATE compression methods.
• Multi-part gzip file may not work

...

• .

Static IP Address of Treasure Data

The static IP address of Treasure Data is the access point and source of the linkage for this Integration. Contact your Customer Success representative or Technical support to determine the static IP address.

Import from SFTP server via TD Console

You can use TD Console to create your data connector.

...

When you configure a data connection, you need to provide authentication to access the integration. In Treasure Data, you can configure the authentication and then specify the source information.

1. Open TD Console.

2. Navigate to Integrations Hub > Catalog.

3. Search and select SFTP.

   

   
   

4. Select Create The Create, and the following dialog opens.Image Modified

   
   

5. Enter the required credentials for your remote SFTP instance. Set the following parameters.

   • Host: The host information of the remote SFTP instance, for example, an IP address.

   • Port: The connection port on the remote FTP SFTP instance, the . The default port number is 22.

   • User: The user name used to connect to the remote FTP instance.

   • Authentication mode: The way you choose to authenticate with your SFTP server.

   • Secret key file: Required if 'public / private key pair' is selected from `Authentication Mode`as Authentication Mode. (Both ed25519 and ecdsa key type is DSA, RSA, and ECDSA are supported.)

   • Passphrase for secret key file: (Optional) If required, provide a passphrase for the provided secret file.

   • Retry limit: Number of times to retry a failed connection (default 10).

   • Timeout: Connection timeout in seconds (default 600).

6. Select Continue. Type Provide a name for your connection.

   

   
   

7. If you would like to share this connection with other users in your organization, check the Share with others checkbox. If this box is unchecked, this connection is visible only to you.

8. Select Done.

...

To get the data from your SFTP server into Treasure Data, you can set up an ad hoc one-time transfer or a recurring transfer at a regular intervalintervals. After creating the authenticated connection, you are automatically taken to Authentications.

1. Search for the connection you created. 

2. Select New Source.

    

Create a Connection

1. Type a name for your Source in the Data Transfer field.

   

   
   

2. Click Next. 

Identify a  Source Table

1. The Source dialog opens.

   

   
   

   
   

2. Edit the following parameters parameters.

Data Settings

1. Select Next.
   The Data Settings page opens.

2. Optionally, edit (Optional) Edit the data settings or skip this page of the dialog.

   

Filters

...

Import from SFTP server via CLI (Toolbelt)

You can also use the SFTP data connector from the command line interface. The following instructions show you how to import data using the CLI.

Install ‘td’ command v0.11.9 or later

Install the most current Treasure Data Toolbelt.

$ td --version
0.11.10

Create Seed Config File (seed.yml)

Prepare seed.yml as shown in the following example, with your SFTP details. We support two authentication methods: Public / Private Key Pair, and Password.

Public and Private Key Pair Authentication

Create seed.yml with the following content.

in:
  type: sftp
  host: <HOST>
  port: <PORT, default is 22>
  user: <USER>
  secret_key_file:
    content: |
      -----BEGIN RSA PRIVATE KEY-----
      Proc-Type: 4,ENCRYPTED
      DEK-Info: AES-128-CBC...
      ...
      -----END RSA PRIVATE KEY-----
  secret_key_passphrase: <PASSPHRASE>
  user_directory_is_root: true
  timeout: 600
  path_prefix: /path/to/sample
out:
  mode: append
  exec: {}

Password Authentication

Create seed.yml with the following content.

in:
  type: sftp
  host: <HOST>
  port: <PORT, default is 22>
  auth_method: password
  user: <USER>
  password: <PASSWORD>
  user_directory_is_root: true
  timeout: 600
  path_prefix: /path/to/sample
out:
  mode: append
  exec: {}

If you are using the proxy, add the additional information as shown:

in:
  type: sftp
  host: <HOST>
  port: <PORT, default is 22>
  ....
  proxy:
    type: http
    host: <PROXY_HOST>
    port: <PROXY_PORT>
    user: <PROXY_USER>
    password: <PROXY_PASSWORD>
    command: <SOMETHING COMMAND IF NEEDED>

The Data Connector for SFTP imports all files that match the specified prefix (e.g. path_prefix: path/to/sample_ –> path/to/sample_201501.csv.gz, path/to/sample_201502.csv.gz, …, path/to/sample_201505.csv.gz).

Guess Fields (Generate load.yml)

Use connector:guess. This command automatically reads the source file, and assesses (uses logic to guess) the file format.

$ td connector:guess seed.yml -o load.yml

If you open load.yml, you’ll see the guessed file format definitions including file formats, encodings, column names, and types. This example is trying to load CSV files.

in:
  type: sftp
  host: <HOST>
  port: <PORT, default is 22>
  user: <USER>
  secret_key_file:
    content: |
      -----BEGIN RSA PRIVATE KEY-----
      Proc-Type: 4,ENCRYPTED
      DEK-Info: AES-128-CBC...
      ...
      -----END RSA PRIVATE KEY-----
  secret_key_passphrase: <PASSPHRASE>
  user_directory_is_root: true
  timeout: 600
  path_prefix: /path/to/sample
  parser:
    skip_header_lines: 1
    charset: UTF-8
    newline: CRLF
    type: csv
    delimiter: ','
    quote: '"'
    columns:
    - {name: id, type: long}
    - {name: account, type: long}
    - {name: time, type: timestamp, format: "%Y-%m-%d %H:%M:%S"}
    - {name: purchase, type: timestamp, format: "%Y%m%d"}
    - {name: comment, type: string}
    - {name: json_column, type: json}
out:
  mode: append
  exec: {}

Then, you can preview how the system will parse the file by using the preview command.

$ td connector:preview load.yml
+-------+---------+----------+---------------------+
| id    | company | customer | created_at          |
+-------+---------+----------+---------------------+
| 11200 | AA Inc. |    David | 2015-03-31 06:12:37 |
| 20313 | BB Imc. |      Tom | 2015-04-01 01:00:07 |
| 32132 | CC Inc. | Fernando | 2015-04-01 10:33:41 |
| 40133 | DD Inc. |    Cesar | 2015-04-02 05:12:32 |
| 93133 | EE Inc. |     Jake | 2015-04-02 14:11:13 |
+-------+---------+----------+---------------------+

The guess command needs over 3 rows and 2 columns in source data file, because it guesses column definition using sample rows from source data.

If the system detects your column name or column type unexpectedly, modify load.yml directly and preview again.

Currently, the Data Connector supports parsing of “boolean”, “long”, “double”, “string”, and “timestamp” types.

You also must create a local database and table prior to executing the data load job. Follow these steps:

$ td database:create td_sample_db
$ td table:create td_sample_db td_sample_table

Execute Load Job

Submit the load job. It may take a couple of hours depending on the size of the data. Specify the Treasure Data database and table where the data should be stored.

It’s also recommended to specify --time-column option, because Treasure Data’s storage is partitioned by time (see data partitioning) If the option is not provided, the data connector chooses the first long or timestamp column as the partitioning time. The type of the column specified by --time-column must be either of long and timestamp type.

If your data doesn’t have a time column you can add a time column by using add_time filter option. For more details see add_time filter plugin.

$ td connector:issue load.yml --database td_sample_db --table td_sample_table --time-column created_at

The connector:issue command assumes that you have already created a database(td_sample_db)and a table(td_sample_table). If the database or the table do not exist in TD, the connector:issue command fails, so create the database and table manually or use --auto-create-table option with td connector:issue command to auto create the database and table:

$ td connector:issue load.yml --database td_sample_db --table td_sample_table --time-column created_at --auto-create-table

The Data Connector does not sort records on server-side. To use time-based partitioning effectively, sort records in files beforehand.

If you have a field called `time`, you don't have to specify the `--time-column` option.

$ td connector:issue load.yml --database td_sample_db --table td_sample_table

Scheduled Execution

You can schedule periodic Data Connector execution for incremental SFTP file import. We configure our scheduler carefully to ensure high availability. By using this feature, you no longer need a crondaemon on your local data center.

For the scheduled import, the Data Connector for SFTP imports all files that match with the specified prefix (e.g. path_prefix: path/to/sample_ –> path/to/sample_201501.csv.gz, path/to/sample_201502.csv.gz, …, path/to/sample_201505.csv.gz) at first and remembers the last path (path/to/sample_201505.csv.gz) for the next execution.

On the second and on subsequent runs, it imports only files that comes after the last path in alphabetical (lexicographic) order. (path/to/sample_201506.csv.gz, …)

Create the Schedule

A new schedule can be created using the td connector:create command. The following are required: the name of the schedule, the cron-style schedule, the database and table where the data will be stored, and the Data Connector configuration file.

$ td connector:create \
    daily_import \
    "10 0 * * *" \
    td_sample_db \
    td_sample_table \
    load.yml

It’s also recommended to specify the --time-column option, because Treasure Data’s storage is partitioned by time.

$ td connector:create \
    daily_import \
    "10 0 * * *" \
    td_sample_db \
    td_sample_table \
    load.yml \
    --time-column created_at

By default, schedule is setup in UTC timezone. You can set the schedule in a timezone using -t or --timezone option. The `--timezone` option supports only extended timezone formats like 'Asia/Tokyo', 'America/Los_Angeles' etc. Timezone abbreviations like PST, CST are *not* supported and may lead to unexpected schedules.

List the Schedules

You can see the list of currently scheduled entries by running the command td connector:list.

$ td connector:list
+--------------+--------------+----------+-------+--------------+-----------------+--------------------------------------------+
| Name         | Cron         | Timezone | Delay | Database     | Table           | Config                                     |
+--------------+--------------+----------+-------+--------------+-----------------+--------------------------------------------+
| daily_import | 10 0 * * *   | UTC      | 0     | td_sample_db | td_sample_table | {"in"=>{"type"=>"sftp", "access_key_id"... |
+--------------+--------------+----------+-------+--------------+-----------------+--------------------------------------------+

Show the Setting and Schedule History

td connector:show shows the execution setting of a schedule entry.

% td connector:show daily_import
Name     : daily_import
Cron     : 10 0 * * *
Timezone : UTC
Delay    : 0
Database : td_sample_db
Table    : td_sample_table
Config
---
in:
  type: sftp
  host: <HOST>
  port: <PORT, default is 22>
  auth_method: password
  user: <USER>
  password: <PASSWORD>
  path_prefix: /sftp/file/path/prefix
  parser:
    charset: UTF-8
    ...

td connector:history shows the execution history of a schedule entry. To investigate the results of each individual run, use td job <jobid>.

% td connector:history daily_import
+--------+---------+---------+--------------+-----------------+----------+---------------------------+----------+
| JobID  | Status  | Records | Database     | Table           | Priority | Started                   | Duration |
+--------+---------+---------+--------------+-----------------+----------+---------------------------+----------+
| 578066 | success | 10000   | td_sample_db | td_sample_table | 0        | 2015-04-18 00:10:05 +0000 | 160      |
| 577968 | success | 10000   | td_sample_db | td_sample_table | 0        | 2015-04-17 00:10:07 +0000 | 161      |
| 577914 | success | 10000   | td_sample_db | td_sample_table | 0        | 2015-04-16 00:10:03 +0000 | 152      |
| 577872 | success | 10000   | td_sample_db | td_sample_table | 0        | 2015-04-15 00:10:04 +0000 | 163      |
| 577810 | success | 10000   | td_sample_db | td_sample_table | 0        | 2015-04-14 00:10:04 +0000 | 164      |
| 577766 | success | 10000   | td_sample_db | td_sample_table | 0        | 2015-04-13 00:10:04 +0000 | 155      |
| 577710 | success | 10000   | td_sample_db | td_sample_table | 0        | 2015-04-12 00:10:05 +0000 | 156      |
| 577610 | success | 10000   | td_sample_db | td_sample_table | 0        | 2015-04-11 00:10:04 +0000 | 157      |
+--------+---------+---------+--------------+-----------------+----------+---------------------------+----------+
8 rows in set

Delete the Schedule

td connector:delete will remove the schedule.

$ td connector:delete daily_import

Modes for out plugin

You can specify file import mode in out section of seed.yml.

append (default)

This is the default mode and records are appended to the target table.

in:
  ...
out:
  mode: append

replace (In td 0.11.10 and later)

This mode replaces data in the target table. Note that any manual schema changes made to the target table will remain intact with this mode.

in:
  ...
out:
  mode: replace

Import from SFTP Server via Workflow

For sample workflows of importing files from your STFP server, view Treasure Boxes.